14
Security Branch
The Security branch of the Top-Level menu allows you to change and save parameters
that are critical to the dial access security password database. Most of the functions
within this branch are protected by the Administration Password. Once the correct
password is entered, these security functions appear on the modem’s LCD. The major
functions that appear under the Security branch are Set Access Control and Reset
Security.
495-14847
Set_Access_Ctrl
(Admin Password?)
Reset_Security
EditPassWdTable
Set_Answer_Sec
Set_Admin_PsWd
Set_Orig_Secur
Set_CallBack_Sec
Security
Call_Setup
Control
Test
Configure
Remote
Status
(Modem Status)
MDMA mdmb mdmc
Reset Security
Reset Security is the second major function within the Security branch of the Top-Level
menu. It erases all contents of the security database table and resets all index locations
to Cleared. The Administration Password defaults to the Reset Default password value.
This value appears as a single number above the bar code on the last page of this
document.
