ACCULINK 317x E1 DSU/CSU
3-6
December 1996
3170-A2-GB20-20
Table 3-3
DTE Drop/Insert Port LEDs
Name
Color
Meaning
SIG
Green
Monitors the signal being received from the DTE Drop/Insert port.
ON :
A recoverable signal is being received from the DTE Drop/Insert
port.
OFF :
The signal cannot be recovered from the DTE Drop/Insert port
(a Loss of Signal condition exists).
OOF
Yellow
Monitors Out Of Frame (OOF) conditions on the received DTE Drop/Insert signal.
ON :
At least one OOF was detected on the signal during the sampling
period.
OFF :
No OOFs were detected on the signal during the sampling period.
ALRM
Yellow
Indicates whether an alarm condition exists on the received DTE Drop/Insert signal.
ON :
An alarm condition (LOS, LOF, EER, RAI, AIS) exists on the
received DTE Drop/Insert signal. Use the Device Health and Status
command to determine the alarm type.
OFF :
No alarm condition exists on the DTE Drop/Insert Interface signal.
PDV
Yellow
Monitors Pulse Density Violations (PDV) on the received DTE Drop/Insert signal.
ON :
At least one PDV was detected (and corrected) on the received
DTE Drop/Insert signal during the sampling period.
OFF :
No PDVs were detected on the received DTE Drop/Insert signal
during the sampling period.
BPV
Yellow
Monitors Bipolar Violations (BPV) on the received DTE Drop/Insert signal.
ON :
At least one BPV was detected (and corrected) on the received
DTE Drop/Insert signal during the sampling period.
OFF :
No BPVs were detected on the received DTE Drop/Insert signal
during the sampling period.
