3
Network
Configuration Option
Settings
Default in [Bold]
Network
1, 2
Interface Status
1
Enable, [Disable]
Line Framing Format
D4, [ESF]
Line Coding Format
AMI, [B8ZS]
Line Build Out (LBO)
[0.0], –7.5, –15, –22.5
Bit Stuffing
[62411], Part68, Disable
Network Initiated LLB
[Enable], Disable
Network Initiated PLB
[Enable], Disable
Transmit Timing
3
[System], Network
ANSI Performance Report
Messages
Enable, [Disable]
Management Link
[Disable], FDL, DDL
IP Address
2
[000.000.000.000] – 223.255.255.255, Clear
Subnet Mask
[000.000.000.000] – 255.255.255.255, Clear
Routing Information Protocol
None, [Proprietary]
Network Time Slot
01–24 [lowest available time slot]
Circuit Identifier
Text field
Loss of Signal (LOS) Alarm
[Enable], Disable
Out of Frame (OOF) Alarm
[Enable], Disable
Alarm Indication Signal (AIS)
[Enable], Disable
Yellow Alarm
[Enable], Disable
Excessive Error Rate (EER)
Alarm
[Enable], Disable
Excessive Error Rate Threshold
[10E-4], 10E-5, 10E-6, 10E-7, 10E-8, 10E-9
1
Read-only when Network is set to 1.
2
This first byte cannot be set to 0 nor 127. However, the null address of 0.0.0.0 is
valid after performing a Clear.
3
Only shown when 9261 T1 NAM is being used.