Paradyne 7984, Руководство пользователя

Страница: 71 / 165

6-1
7970-A2-GB20-00 August 1999
Testing
6
Accessing the Test Menu
From the Test menu, you can run network tests, data port tests, and a front panel
lamp test.
To access the Test menu, follow this menu selection sequence:
Main Menu
→
Test
Î ÎÎ
main/test Hotwire
Model: 79xx
TEST
Network & DSX-1 Tests
(Models 7974, 7984)
Network Tests (Models 7975, 7985)
Network & G.703 Tests
(Models 7976, 7986)
SYNC Data Port Tests
(Models 7975, 7985)
Device Tests
Abort All Tests
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu MainMenu Exit
Select . . . On . . . To . . .
Network and DSX-1 Tests Models 7974 and 7984 Start and stop tests on the DSX-1 or network interface.
Network Tests Models 7975 and 7985 Start and stop tests on the network interface.
Network and G.703 Tests Models 7976 and 7986 Start and stop tests on the G.703 or network interface.
SYNC Data Port Tests Models 7975 and 7985 Start and stop tests on the SYNC Port interface.
Device Tests All models Start and stop lamp test.
Abort All Tests All models To abort all current tests excluding network-initiated
loopback tests. An aborted test may continue to run for a
few seconds as the abort command is sent to the
remote end and processed.