IPD4-A2-GZ40-10
July 2005
3
9. Upon such termination, the Licensee shall refrain from any further use of the
Software and destroy the original and all copies of the Software in the
possession of Licensee together with all documentation and related materials.
10. This Agreement shall be governed by the laws of the State of Florida, without
regard to its provisions concerning conflicts of laws.
Introduction
Paradyne's 4000E IP Broadband Loop Carrier (BLC) provides a high capacity and
native IP Ethernet foundation for a variety of feature-rich multi-service access
mulitplexer modules.
The 4000E BLC features a high capacity backplane delivering up to 8 Gbps
throughput, and providing a non-blocking architecture for even the highest
bandwidth broadband access technologies, such as ADSL2+. It supports a single
uplink, management, and switching module connected to the dual backplanes with
redundant modular backhaul/uplink ports to support 10/100 Ethernet, GigE
(copper or fiber), T1/E1, and dual bonded T1/E1 uplink modules.
The 4000E BLC is environmentally hardened for installation in Remote Terminals
or street cabinets. For flexibility of installation the 4000E BLC has removable
mounting brackets that can be placed in increments of 1.45” up to 9.28” from the
front of the chassis, allowing for multiple installation options in either 19" or 23"
equipment racks.
Unpacking and Inspecting the Equipment
HANDLING PRECAUTIONS FOR
STATIC-SENSITIVE DEVICES
This product is designed to protect sensitive components from damage
due to electrostatic discharge (ESD) during normal operation. When
performing installation procedures, however, take proper static control
precautions to prevent damage to equipment. If you are not sure of the
proper static control precautions, contact your nearest sales or service
representative.
The following components should be included in the shipping container:
1 – 4000E BLC with 1 fan module and 12 slot covers
4 – Rubber Bumper Screws
!
