[3] Keypad Code
This feature permits you to change the Keypad Code (default: 000000). In step 3 of “Entering Keypad Programming Mode”, select option
[3]
.
The keypad will now prompt you to enter the new 6-digit Keypad Code. After entering the final digit you will hear a confirmation beep. Please
note that if you wish to reset the Keypad Code to its default value, press and hold the
[
CLEAR
]
key during the keypad’s power up.
[4] Keypad PGM
This feature allows to program the keypad’s on-board PGM output. In step 3 of “Entering Keypad Programming Mode”, select option
[4]
. The
keypad will now prompt you to enter a two-digit value. Choose one of the three following PGM modes, then press
[
ENTER
]
.
00 = Keypad’s PGM output is disabled
01 = Keypad’s PGM will follow the Global PGM event programmed in the Spectra control panel
02 = The keypad’s PGM output is activated or deactivated by pressing and holding the
[
FNC
1]
key
[5] Read Key
Use this feature to copy the contents a Paradox Memory Key into the keypad’s memory. Insert a programmed Paradox Memory Key (see option
[6]
) into the keypad connector labeled “key” (see figure 1). In step 3 of “Entering Keypad Programming Mode”, select option
[5]
, then press
[
ENTER
]
. The screen will display “Reading Key”. The keypad will copy the contents of the memory key into the keypad’s memory. This may
take approximately 60 seconds. When the process is complete, the keypad will emit a confirmation beep.
[6] Write Key
Use this feature to copy a keypad’s programmed options and labels (messages) into a Paradox Memory Key. Insert the Paradox Memory Key
into the keypad connector labeled “key” (see Figure 1). Make sure the memory key’s jumper is on. In step 3 of “Entering Keypad Programming
Mode”, select option
[6]
, then press
[
ENTER
]
. The keypad will display “Writing Key”. This may take approximately 15 seconds. When the
process is complete, the keypad will emit a confirmation beep. Program one keypad, copy its contents into the memory key as explained in
this option, then program as many keypads as required using option
[5]
(see above).
Figure 1: Spectra 1641 LCD Keypad Connection Diagram
