Magellan Wireless Expansion Module
11
4.3 User Parameters
The MG-RCV3 supports up to eight users and eight remote controls. When
connected to an Esprit control panel, each of the following user parameters
must be performed for every MG-RCV3 user. In stand-alone mode, assigning a
user to the MG-RCV3 does not apply. Refer to Table 4.1 on page 11 for the
relationship between the user parameter sections.
• Assign the user to the MG-RCV3
• Assign a remote control
• Define the remote control buttons
How to set the installer code.
In step 4 in section 3.2 on page 10:
1. Enter section
[00]
.
2. Enter the
[
NEW
INSTALLER
CODE
]
.
3. Press
[
ENTER
]
.
Table 4.1: User Parameter Sections
User # / RC #
Assign User To
Module (Esprit
mode only)
Assign Remote
Control
Define Remote
Control Buttons
1
[01]
[09]
[17]
2
[02]
[10]
[18]
3
[03]
[11]
[19]
4
[04]
[12]
[20]
5
[05]
[13]
[21]
6
[06]
[14]
[22]
7
[07]
[15]
[23]
8
[08]
[16]
[24]
MGRCV3ES_EI01.fm Page 11 Wednesday, May 4, 2005 3:27 PM
