lar” arming with an “exit delay” (“
READY
”
LED
flashes). At the end
of the “exit delay” period, the system is “regular” armed.
Keyswitch/Push-button Arming
Your system can include a key switch or push button that
arms/disarms the system. This arming method is particularly use-
ful when installed in a master bedroom, making system arming
and disarming convenient and accessible. The beautifully-styled
Esprit PS1 bedside remote has been specifically designed for this
application and includes a panic zone.
If an
alarm
is generated in your system, or a zone that has not
been defined as a “Stay” zone is opened after panel arming, the
system can only be
disarmed
from a
keypad
(if keyswitch is pro-
grammed for "Stay" arming) using an
access code.
Please ask your installer for more information.
(4) MANUAL BYPASS arming
[
BYP
]
plus
ACCESS CODE
(Arms the system while bypassing defective zones and/or zones
you wish to leave open)
Note:
Bypassed zones are no longer monitored by the security
system and will not generate an alarm on the control panel.
You might not wish to arm the entire system when, for example,
workers are renovating part of your house, or for any other rea-
son you need to leave a zone open. If a component of your secu-
rity system is damaged, it can also be bypassed until repairs are
made. Manual bypass arming instructs the control panel to ignore
zones that you designate “open”, so that the rest of the system
can still be armed. (Based on your instructions, only zones that
your installer has programmed “bypass-enabled” can be
UM639
10
bypassed during manual bypass arming, normal arming or “Stay”
arming. Note that
the fire zone cannot be bypassed.
)
Press the bypass
[
BYP
]
key, followed by your
ACCESS CODE
. You are
now in “bypass” mode. If there are no zones currently bypassed,
the LCD display will read “
(
NONE
)
.” If certain zones have already
been bypassed, the message “
ZONE BYPASS
-
ZONE NUMBER
”
appears on the display. The
[+]
and
[-]
keys can be used to scroll
through information at sequential locations (i.e. to scroll zones
from 1-12 and 13-24). To reach the zones to bypass, press
[2
ND
]
(i.e. if the display shows zones from 1-12, pressing
[2
ND
]
displays
zones 13-24 (the
indicates that you are in the 13-24 zone dis-
play mode), pressing
[2
ND
]
again displays zones 1-12.) Enter the
key numbers corresponding to the zones you wish to "bypass".
Press again on the zone key if you wish to undo a zone selection.
If you have entered the correct zone bypass information, press
[
ENTER
]
. If “
ZONE BYPASS
” is displayed, it indicates that zones have
been bypassed, and system status will be indicated by the LCD dis-
play. If you make an error entering zone numbers, press
[
CLEAR
]
.
By using the “bypass recall” feature, you can reinstate the latest
zone bypass instructions saved in memory. Press
[
BYP
]
while in
“manual bypass arming” mode and the previous bypass status
will be reestablished. This eliminates the need to enter the same
"bypass" information every time you arm the system.
(5) FORCE (Away) arming
[
AWAY
] plus code
(
Arms the system quickly
)
To arm the system rapidly without waiting for the “
READY
” light, use
Force “Away” arming. Press
[
AWAY
]
, followed by a valid access
UM639
11
