2) Enter the two digit "code number" (01 to 48) for the user code
you wish to program. You will hear the “
CONFIRMATION
” beep.
The display will now read “
ADDRESS
:
-
KEY IN ADDRESS
”.
3) Key in a
4 (or 6) digit
user code, the “
CONFIRMATION
” beep will
be heard again. The display message returns to “
ADDRESS
-
KEY IN ADDRESS
“. A four (or six) digit user code has been
entered into memory. You may continue programming other
user codes, or press
[
CLEAR
]
to exit programming mode.
Note:
The display reads
“
NONE
”
when the location is empty.
Duress code:
The last user code (user 48) can be programmed as a “Duress
code”. If you are forced to arm or disarm your system under
threat a duress code can be entered in the key sequence to pro-
duce a silent alarm at the monitoring station. Check with your
installer to see if this option is active on your system.
Deleting a user code:
Press
[
ENTER
]
, master code, and code to be erased. If the code is
programmed, the display shows:
00********000
********
Press
[2
ND
]
to delete that user code. The display will now read:
“
NONE
”
. Press
[
ENTER
]
to end user code programming. Press
[
CLEAR
]
to exit programming mode.
ARMING THE SYSTEM
(without partitioning)
The Esprit can be armed in 5 different ways designed to cover a
wide variety of security situations. We suggest that you familiar-
UM639
6
ize yourself with all 5 arming procedures so that you can take full
advantage of your security system.
(1)
REGULAR system arming
(used for normal, day-to-day system operation)
The keypad’s green "
READY
" light must be “
on
” in order to arm the
system. This light will only illuminate if all zones are closed. The
LCD display will read “
SYSTEM READY
”. All doors and windows
must be closed, and there can be no movement in areas moni-
tored by motion detectors.
When the green “
READY
” light is not on, the LCD shows and scroll
automatically “
ZONES OPEN
”, followed by the open zone number and
description. Press the
[+]
or
[-]
keys to see all zones from 1 to 24.
If all zones (in both systems) are closed, and the “
ZONES OPEN
”
message still appears in the display, this indicates that there may
be a problem communicating with the control panel. Please con-
sult your monitoring company in this case.
Once the "
READY
" light is on, enter your user code. (The installer
can program all user codes/code priorities for you.) If you make a
mistake entering your code, the keypad sounder “
END
/
REJECTION
”
beep will let you know. Just press
[
CLEAR
]
and re-enter the code.
When you have correctly entered your user code, the red "
ARMED
"
light will come on. You will hear the keypad “
CONFIRMATION
” beep
and the display will read “
EXIT DELAY
”. The "
READY
" light will flash and
the keypad will "beep" (if programmed) during the exit delay period.
(For the last 10 seconds of the exit delay, the beep will be faster.)
UM639
7
