Paradox Digiplex DGP-620, Руководство по установке, Страница: 9 / 26

Digiplex LED Keypads 7
3.0 PROGRAMMING
To program the Digiplex LED keypad you must enter “Module
Programming Mode”. Use the
Digiplex LED Keypads Programming
Guide to keep track of which sections were programmed and how.
We strongly recommend you read this entire manual before you
begin programming.
3.1 E
NTER
M
ODULE
P
ROGRAMMING
M
ODE
The keypad, like all other modules in the Digiplex system, is
programmed through the control panel. To do so, enter the
“Module Programming Mode”:
Step 1:
From
Normal Mode press and hold the [0] key.
The keypad will emit a Confirmation Beep.
Step 2:
Enter the
[
INSTALLER CODE
] (by default 000000).
The [
PRG
] LED will flash.
Step 3:
Enter section
[953] .
The [
PRG
] LED and the [10] LED will illuminate ( [10] represents
zero).
(To view an unlabeled keypad’s serial number, enter section [000]
instead of [953] and use the button to view the numbers one at
a time.)