Paradox 738ULT, Справочное и монтажное руководство

Страница: 16 / 56

12
Reference & Installation Manual
Part 4: Programming Methods
The 728 Ultra and 738 Ultra control panels can be programmed using either the keypad or the Espload Software (V3.0 or higher for 728
Ultra, and V3.4 or higher for 738 Ultra). We highly recommend programming the control panels using the Espload Software, as it simplifies
the process and reduces the potential for data entry errors.
4.1 Espload Software
With the Espload Software (V3.0 or higher for 728 Ultra, and V3.4 or higher for 738 Ultra), you can program the 728 Ultra and 738
Ultra control panels remotely via modem or locally using an ADP-1 adapter. The advanced Espload software can execute fast
uploads or downloads and provides many powerful features. These include a comprehensive monitoring mode to oversee all
panel activity, a scheduler to initiate pre-programmed tasks at set intervals, and a batch mode to carry out pre-programmed tasks
following a call from the control panel. Using Espload there is no limit to the number of account files or panel defaults created and
you can assign thousands of programming combinations to the PGM outputs. Espload can also be converted to the language of
your choice. Contact your local Paradox Distributor for your free copy of the Espload software.
4.2 Keypad
When programming, use the 728 Ultra & 738 Ultra System Programming Guide to keep track of which addresses were
programmed and how. Before you begin programming the control panel, we recommend that you read Parts 5 through 11 of this
manual in order to give you a good understanding of the control panel and its many features. When programming with the
keypad, certain addresses are programmed using different methods. These methods are described in detail below. Each section
in this manual will reference the appropriate programming method.
4.2.1 Hex Programming
Addresses 000 to 043 and 300 to 527 are programmed using the Hex Programming method. In this mode, you can
enter any hex-digit from 0 to F where keys
[1] to [9] represent digits 1 to 9 respectively; the other keys represent hex-
digits A to F as shown in Figure 23. To program using the Hex Programming method:
1. Press [
ENTER
] + Installer code. The [
ENTER
] key will flash indicating you are in programming mode (LED keypad only).
2. Enter the desired 3-digit address. The keypad will display the 2-digit data currently saved at this address as
described in Figure 23.
3. Enter 2-digit data. After entering data you do not need to press
ENTER
, the software will automatically save the data
into the selected address.
4. Return to step 2 to continue programming or press [
CLEAR
] to exit programming mode.
Figure 23: Hex Programming
Hex Digit Data Display for LED Keypads
Note: LCD keypads will display current data on the screen.
Therefore 2-digit data = 7A
= First digit = 4 + 2 + 1 = 7
= Second digit = 8 + 2 = 10
Note: Values 10 to 15 represent hex digits A to F respectively. See the
keypads at left.
Each key in the first 2 rows of the keypad represents a specific value when the
key is lit, as shown above. If the key isn’t lit, the key represents 0. The sum of the
values of the lit keys in the first row correspond to the second hex digit. The sum
of the values of the lit keys in the second row correspond to the first hex digit as
shown in the example below.
Sum of the second row = first hex digit
Sum of the first row = second hex digit
If the key is not lit, value = 0