Paradox 1640, Руководство пользователя

Страница: 14 / 44

10 User Guide
3.7 Force Arming
During Force Arming, any open zones are temporarily
“deactivated” so you can rapidly arm the system without
waiting for all of the zones in the system to close. When the
zone closes, the system will then arm those zones. Force
Arming is commonly used when a motion detector is
protecting the area occupied by a keypad.
Force Arming can also be activated by using One-Touch
Force Arming (see page 13).
How Do I Instant Arm?
1. Stay Arm the system as outlined in Stay Arming on
page 9 .
2. During the Exit Delay press and hold the key for 3
seconds.
How Do I Force Arm?
1. Close zones in the desired area (except Force Zones).
2. Press the
key.
3. Enter your [
ACCESS CODE
] .
4. If required, press the key corresponding to the desired
area, [1] or [2] . For both areas, press the other key after
the confirmation beep.
1640-EU02.fm Page 10 Wednesday, May 18, 2005 3:10 PM