HSL-32 Hibachi Griddle Operator Manual
Specifications
•
11
Gas Regulator
Check the griddle’s rating plate (Figure 19) to ensure your gas supply is correct for the griddle you
purchased.
Gas Line Length
All gas supply lines should be as short as safely possible. Gas supply lines lose pressure over distance and
with each elbow or “T” Adapter fitting added, which causes pressure drops that negatively impact
performance.
LP Gas
For each griddle configured for LP gas supply, customer must purchase and install an LP gas regulator set
for 11” water column pressure.
A single or double side burner must be connected to a separate regulated supply line and LP tank.
Natural Gas
A griddle configured for NG supply comes with a manufacturer-supplied regulator set for 4” water
column pressure.
For NG supplied griddles, a side burner may be connected to the griddle’s regulated supply line via a “T”
adapter, or connected to its own separate regulated supply line.
Installation
Operating a gas cooking appliance without a proper regulator is
dangerous and may cause serious bodily injury, death and/or property
damage, and voids all warranties. Gas appliances are convertible
to/from NG or LP gas supply by a licensed professional.
Customer must hire a licensed technician to ensure safe and proper
installation of all gas regulators, gas supply hoses, gas conversions,
electrical connections and lines, and plumbing connections.
STATE OF MASSACHUSETTS
– Massachusetts requires all gas be installed by a plumber or gas fitter
carrying the appropriate Massachusetts license. All permanently-installed natural gas or propane
installations require a "T" handle type manual gas valve be installed in the gas supply line to this
appliance. This does not apply to portable propane installations using a 20 lb. cylinder.
Delivery company employees are not licensed electricians or plumbers and shall NOT install or
connect any gas regulators or supply lines, electrical connections or lines, or plumbing.
