GSL-SB2B Double Side Burner Operator Manual
Double Side Burner Assembly
•
21
7.
Connect the LED light electrical cable to the power supply:
Figure 14 Connect Power Supply
a.
Align the burner unit plug with the power supply holes (Figure 14 left)
b.
Insert the plug until it is fully seated (Figure 14 center)
c.
Slide the gnarled locking nut to the threads and hand-tighten until it stops; do not force
8.
Plug in the LED light power supply and test the lights: press the light button to turn on the control
knob lights; press again to turn them off (Figure 15)
Figure 15 Light Control
