GSL-32 and GS-32 Operator Manual
Grill Assembly
•
21
Grill Setup
Complete the grill setup with these steps:
1.
Pull the drip pan out slightly and remove the protective covers from each side (Figure 15)
Figure 15 Drip Pan Protective Covers
2.
Unbox the four flame tamer/heat separators; DO NOT DISASSEMBLE THESE ITEMS
3.
Seat each flame tamer in place on support pins on each end with briquet side up (Figure 16)
Figure 16 Flame Tamer Installation
a.
There are four pairs of pins on each side, one pair for each flame tamer
b.
Align the flame tamer slots with the pins and set in place, and repeat
4.
Remove the grate sections from the plastic and set in place on the support rail with the lift hole in
front and the 3 bars on the bottom
Figure 17 Grill in Place
