PARADISE GRILLS GSL-32, Руководство оператора

Страница: 20 / 53

18
•
Grill Assembly GSL-32 and GS-32 Operator Manual
Install the Grill
Complete this procedure to install the grill into the island:
1. Remove the two cooking grill sections and set them aside
2. Remove the four cotter pins from the burner bars at the backside of the grill and set them aside
Figure 9 Remove Burner Cotter Pins
3. Check each burner for obstruction:
a. Remove one burner at a time – lift the back end of the burner, then pull it out of the front
panel
b. Look into the burner tube to check for any foreign particles, and remove with cold water
and a brush if needed
c. Ensure the burner air gap (Figure 10, left) is positioned appropriately for the gas source; the
shutter edge should be aligned with P for LP (propane) gas. The shutter should be opened to
about 3/8” for LP gas (see Convert to Another Gas Type for NP gas settings)
Figure 10 Burner Air Gap
d. Replace the burner – position the burner tube into the valve opening (Figure 11, left), then
insert the mounting pin into the hole on the far side (Figure 11 right)