Page 5 of 33
Issued: 2022-11-01
Rev. 2
Installation and assembly instructions provided
are intended for authorized Paradise Dock
& Lift dealers and installers. If you require
assistance, please contact Paradise Dock & Lift
to be put in contact with a dealer in your area
who can safely assemble and install this system.
An installer must determine if they have the
necessary experience, knowledge and skills to
safely assemble and install a lift system. If there
is any confusion, please contact Paradise Dock
& Lift. Improper assembly and/or installation
may cause a risk to property, safety or lift
functionality/reliability. A failure to correctly
follow assembly and installation instructions
constitutes a waiver of the installers rights
against Paradise Dock & Lift for subsequent
damages. The installation instructions
provided are not a warranty or guarantee, best
judgement must be used during installation.
Many boats (catamarans, v-hull, pontoon,
tritoon, etc) require custom supports and
bunk configurations. Any watercraft should
be supported as per boat manufacturer
recommendations and installers should contact
the boat manufacturer to verify. Incorrect and
inadequate support may result in boat damage.
Paradise Dock & Lift can not determine,
guarantee, warrant or take responsibility for
bunk/support configurations meeting each
manufacturers recommendation.
CAUTION!
• During the first few operations of the lift, the
weight of the watercraft may cause the lift
to settle. Stay well away from the lift during
actuation until it is seen that the installation
is stable.
• The frame structure, welds, bolt and pin
conditions should be inspected for issues
such as corrosion and wear annually.
• Do not store items in the power pack box,
items may damage hydraulic and electrical
systems.
WARNING!
• Leave the lift in the fully “up over centre”
position during storage, this is the safest
position.
• Do not position the lift near areas where
people swim or dive frequently. When it is
lowered, swimmers may inadvertently hit
the lift causing injury.
• Ensure that the lift remains level within 2
inches. Out-of-level lift installations may be
unstable and increases the risk of capsizing
and injury.
• Never disconnect hydraulic hoses with a
watercraft on the lift.
• Never enter the lift while the boat is under
power. Glide in at a slow speed. The lift is
not designed to take large impacts from a
fast moving boat. Large impacts may cause
damage to the lift.
• It is recommended that the lift be partially
raised out of the water if people are
swimming in the vicinity. Use the remote to
raise the lift when departing so swimmers
can see the location of the boat lift.
LIABILITY DISCLAIMER
