Par-Kan Grain-Weigh GW200A, Руководство пользователя

Страница: 14 / 35

14
Grain-Weigh 200A Weigh Bar Replacement
Remove old weigh bar
First locate which weigh bar needs to be replaced
Remove weigh bar wire from weigh head
Place floor jack under inner frame and release pressure off weigh bar.
Remove the 3/8” bolts on outer frame
Remove the 7/16” bolts on inner frame
Remove inner collar from inner frame
Push weigh bar toward center of cart
Install new weigh bar
Run wire through inner frame weigh bar hole
Put weigh bar into frame
Make sure marking on the top of weigh bar is on the top
For Side Weigh Bars
Make sure to install both weigh bar spacers prior to installing weigh bar
Install small spacer first and then the larger spacer
After weigh bar is installed, the weigh system must be re-calibrated.