PAPILLON 97843, Инструкция по эксплуатации

Страница: 17 / 44

cod. 97843 / 97844 / 97846
17
m. Pull the spark from the socket:
· whenever you leave the machine;
· before clearing a blockage;
· before checking, cleaning or working on the appliance;
· after striking a foreign object. Inspect the appliance for damage and make repairs as
necessary;
· if the appliance starts to vibrate abnormally (check immediately).
4) Maintenance and storage
a. Keep all nuts, bolts, and screws tight to be sure the appliance is in safe working condition.
b. Check the grass catcher frequently for wear or deterioration.
c. Replace worn or damaged parts for safety.
For rotary mowers, ensure that only replacement cutting means of the right type are used.
- Never store the equipment with petrol in the tank inside a building where fumes can reach
an open flame or spark;
- Allow the engine to cool before storing in any enclosure;
- To reduce the fire hazard, keep the engine, silencer, battery compartment and petrol storage
area free of grass, leaves, or excessive grease;
- If the fuel tank has to be drained, this should be done outdoors.
SPECIAL SATETY WARNING
1. Grip the handles of the brush cutter firmly with both hands. If you suspend the work, place the throttle
into the idling position.
2. Always be sure to maintain a steady, even posture while working
3. Maintain the speed of the engine at the level required to perform cutting work and never raise the
speed of the engine above the necessary level.
4. If the grass gets caught in the blade during operation , or if you need to check the unit or refuel the
tank always be sure to turn off the engine.
5. If the blade touches a hard object like a stone immediately stop the engine and check
if something is wrong with the blade. If so, replace the blade with a new one .
6. If someone calls out while working, always be sure to turn off the engine before
turning around.
7. Never touch the spark plug or plug cord while the engine is in operation. Doing so may
result in being subjected to an electrical shock.
8. Never touch the muffler, spark plug or other metallic parts of the engine while the
engine is in operation or immediately after shutting down the engine. Doing so may result
in serious burns.
9. When you finish cutting in one location and wish to continue working in another
spot, turn off the engine and turn the machine to have the blade facing away from your
body.
10. Check that the cutting attachment stopped turning under the engine idle before starting to use the
machine.