Instruction manual cod. 95047
A.
Installation:
1.
Open the battery compartment with screwdriver and must insert Fresh 2pcs AA alkaline batteries.
Replace them at the beginning of each watering season. Then, put the battery compartment back &
tighten it with screwdriver on the unit.
2.
Hold the unit steady. Screw the collar onto the faucet/tap until it is tight, then tighten the locking
collar. Turn on the faucet/tap. Don not use a wrench or pliers.
Operation:
Please see the figure B. and follow the 6 steps to set up your timer.
＊
Please be noticed of each setting must be finished within 30seconds
1.
Once install the battery seat onto water timer, the Green and Red LED light start to flash 4 seconds.
Then, turn off the valve automatically and the Red light flash one time.
2.
Revolve the knob to RESET position, press OK button. The Red light start flash to wait for current
TIME set up.
3.
B.
4.
Set up current TIME with revolve the knob with the arrow indicates on white from 1~24 (24hours),
Current time set up from 1~24
o’clock.
Enter TIME button (settled).
Start time set up from 1~24
o’clock.
Enter START button (settled).
Frequency (interval)
from 6 / 8/ 12/ 24 hours, 2/ 3/
7 days.
Enter OK button (settled).
Enter (OK) button.
Run (Watering) time set up
from 1~180 minutes.
Enter OK button (settled).
Enter (OK) button.
