that you have clearance to put the right side in the hole on the right side. Attach the output wheels
as shown along with the output tray extension.
IF YOU ARE INSTALLING THE PH-17 WITH A STACKER OR KNIFE FOLDER
INSTALL THE OUTPUT TRAY ONLY (no wheels) TO TEST A FEW SAMPLES. You will not be using either the
output tray or the wheels on the PH17. If you have a stacker, it is not used. If you have the knife cross
fold system, the output tray will go on the knife folder. However, you need to test the machine to
make sure it works properly before installing the Knife folder or the Stacker.
Page
5
PaperFolder.com
