PaoFonG PF-1225, Руководство пользователя

Страница: 9 / 12

FAST DRILL RE-SHARPENING MACHINE
Procedures for changing the grinding
wheel
1. Loose the side knob (B1) and open the side cover (B2).
2. Use a 4mm kexagon wernch to loose the screw (B3),
unscrew it counter-clockwise.
3. Replace with a new diamond grinding wheel and tighten
the screw after the wheel is installed.
4. Be sure to close the side cover (B2) properly and to
fasten the side knob (B1).
Attention:
Piease DO NOT switch on the machine BEFORE
(1) the diamond wheel screw (B3) is tightly screwed.
(2) the side cover (B2) is properly closed.
(3) the right knob (B1) is fully fastened.
1. In case of any hazard from occurring, please make sure
that the above measures are followed strictly.
2. The machine has an automatic “power-off” device to
ensure operator’s safety. Power supply will be cut-off
immediately when the cover is opened.
Patented Features
1. Double-bearing grinding unit (reduce wear).
2. Drill tightened design with bearing devise.
3. Adjustable trimming angle.
Standard Accessories
PF-1226
1. ER Collets, ranged from 12mm-26mm (15pcs).
2. CBN Dimand wheel #150x1 PCS (for High Speed
drill).
3. 4mm and 6mm Hexagon (Hex.) wrench x 1 pc
each.
Optional Accessories
PF-1226
1. SDC #200 Diamond wheel (For carbide drill).
2. ER Collets, include 3.5~12.5mm (10pcs).
Model PF-1226
Drill Diameter Ø8mm - Ø30mm
Point Angle 85° ~ 140°
Power Supply DC110 / DC220 50/60HZ
Motor 450W
R.P.M 4000RPM
Weight 25 kg
8