Pantum P2210 Series, Руководство пользователя

Страница: 69 / 89

59
9.1.1. Functions of Buttons on the Control Panel
9.1.1.1. Operation Function of WiFi Search Button
If there is no WiFi connection, short-press this button to launch WiFi connection and search WiFi
Hotspot AP; stop searching if it fails to find any Access Point (AP) within 2 minutes.
If there is WiFi connection while no WiFi print job, press and hold this button to disconnect WiFi
connection.
If there is WiFi connection and WiFi print job, wait until the job is completed and then press and hold
this button to disconnect the WiFi connection.
During WiFi connection, press and hold the button to cancel WiFi connection.
In Sleep Mode, press or press and hold the button to wake up the printer and exit Sleep Mode.
9.1.1.2. Operation Function of Cancel/Continue Button
If the printer is in sleep mode, press or press and hold this button can wake it up.
Press and hold this button during printing can cancel the current print job.
When the printer is in ready mode, press and hold this button can print the test page.
9.1.1.3. Operation Function of Information Button
When the printer is in ready mode, press and hold this button can print the test page.
9.1.2. Function of LED Indicators on the Control Panel
9.1.2.1. LED1 Status Indication
The meanings of the status indication of LED1 are as follows:
Serial
No.
Paper/WiFi Multi-colored
LED1 Status Indication
Status Description
(For printers with USB+WiFi
interface)
Status Description
(For printers with USB
interface)
1
No WiFi connection, no paper
error, sleep mode
LED1 off
No WiFi connection, no paper
error, sleep mode
LED1 off
2
Searching WiFi, no indication of
paper error
LED1 with green light flashing
slowly
N/A
3
Successful WiFi connection, no
paper error
LED1 with green light staying
on
N/A