Pantum P2210 Series, Руководство пользователя

Страница: 58 / 89

48
6.2.1. Wireless setup
You can set the printer's wireless network, wireless IP configuration and WiFi Direct through the
Wireless Settings page. Before setting, please log in the embedded Web Server (Please see
Chapter 6.1 for login method).
6.2.1.1. Wireless network
1) If you need to set up wireless network, please click the SSID of access point (wireless router) in
search list, input secret ke
y and click “Apply”.
6.2.1.2. Wireless IP setup
You can set the printer's IPv4 and IPv6 through the "Wireless IP Settings" page. Before setting,
please connect your printer to the internet and log in the embedded Web Server (Please see
Chapter 6.1 for login method). Only when the wireless network of printer is turned on, the Wireless
IP Configuration can be displayed on Web server.
1
）
DHCPv4 is ticked by default. If IP address needs to be set up manually, please cancel the
DHCPv4 checkbox ticked and input the “IPv4 Address”, “Subnet Mask” and “Gateway Address” that
you need to set up and then click “Apply”.
6.2.1.2.1. IPv4 setup
IPv4 address of the printer is divided into DHCP auto assignment and manual setting, and the
DHCP auto assignment function is on by default. You can set up the IPv4 address of printer
manually to set up fixed IPv4 address for the printer.
6.2.1.2.2. IPv6 setup
In the "Wireless Network IPv6", you can check "IPv6 Local Link Address" and "Stateless address".
Note
：
The printer supports using the following IPv6 addresses for network printing and
management.
• IPv6 local-link address: local IPv6 address set up by oneself (addresses beginning
with FE80).
• Stateless address: IPv6 address set up by network router automatically.
6.2.1.3. WiFi Direct setup
The printer can be connected to a wireless device via WiFi direct connection only when the printer's
WiFi Direct function is enabled.
1. Click “Settings” – “Network settings” – “Wireless setup” – “WiFi Direct”.
1
）
By default, WiFi Direct is disabled. To enable it, please select "Automatic" or "Manual" and click
"Apply".