Pantour PANTOUR SUSPENSION HUB, Руководство пользователя

Страница: 7 / 8

6
QUICK RELEASE ROD
CLAMP SCREW
END CAP
SPLIT WASHER
AXLE ROD
PIVOT ROD
WASHERS
PIVOT ROD
End cap assembly.
Troubleshooting.
The suspension is locking up.
Step 1. Check if the pivot rod has 2 washers on each side.
Step 2. If the pivot rod washers are missing please order the washers from Pantour or
your local bike shop and install the washers as shown.
Step 3. If washers are not missing, please call Pantour to order split washers. These
washers will extend the length of the axle and pivot rod and prevent hub from locking.
Install the split washers in axle rod hole located on the end cap.
The suspension is bottomed out.
Step 1. Check the elastomer and replace it as described in the instructions on page 3 of
our Manual. For your best riding performance use the elastomer Pantour selected for your
weight category.
Bearings replacement.
Step 1. Call Pantour or your local bike shop to order new bearings. Replace the bearings
as described in the instructions on page 3 of our Manual.
Loosed bearing.
Step 1. Remove the bearing from hub shell bearing pocket. Spread a lactate around the
bearing and bearing pocket and press fit the bearing in as described in the instructions
on page 3 of our Manual (bearing installation).
Hub wobble.
Step 1. Check if the bearings are not loose.
Step 2. Check if the bushings (part No. 12 on pg. 4) are not loose. Use lactate around
the bushing and press fit it into the center tube until flush.
Step 3. If the bushings are wear out, please call Pantour or your local bike shop for
new parts. Follow step 2. for installation.
Elastomer replacement.
Step. 1 Call Pantour or your local bike shop to order new elastomer. Replace the elastomer
as described in the instructions on page 3 of our Manual.
Bushing replacement.
Step 1. Follow our instructions under Hub wobble.
Missing part.
Step 1. Call Pantour or your local bike shop to order the part you need.