manualshive.com logo in svg

panthera S2, Руководство пользователя

Поделиться
Скачать
panthera S2 Скачать руководство пользователя страница 16

16

art.nr.bruk-S2-eng, Rev. 2015-01

Panthera 

AB reserves the right to make technical changes

CRASH TEST

Wheelchairs that are crash tested and approved

Panthera wheelchairs S2, U2 and S2 Swing have been approved

 for use in vehicles employed 

by the Swedish disabled transportation service in accordance with the following. Below we present 
details of how to attach the chair in an approved way and list the materials used in the tests.The 
following wheelchair models and materials were used and approved in the tests mentioned above. 
This report is based on the results of crash tests conducted on Panthera wheelchairs in accordance 
with ISO-7178-19:2001 and ISO-10542:2000. Crash testing has been performed by: The Technical 
Research Institute of Sweden (SP). Test dates: 20-02-2003 and 12-11-2008

Panthera S2

:

Attachment equipment:      Unwin Belt 4-point with snap hook

User seatbelt:                     Unwin 3-point seatbelt, high deflector

Fastening:                          Unwin low profile rail

Test dummy:                       Hybrid III dummy (weight 76.3 kg)

Panthera U2:

Attachment equipment:       Unwin Belt 4-point with snap hook

User seatbelt:                      Unwin 3-point seatbelt, high deflector

Fastening:                           Unwin low profile rail

Test dummy:                        Hybrid III dummy (weight 76.3 kg)

Panthera S2 Swing:

Attachment equipment:       Unwin Belt 4-point with snap hook

User seatbelt:                      Unwin 3-point seatbelt, high deflector

Fastening:                           Unwin low profile rail

Test dummy:                       Hybrid III dummy (weight 75 kg)

This crash test was conducted in cooperation with Unwin, which produces attachment equipment for 
wheelchairs. For further information about the belts please contact Unwin.

Wheelchair configuration during crash test

The wheelchairs crash tested from Panthera were the following models and dimensions:

Panthera S2

:

Chassis S2 complete, width 45, Back complete, width 45, height 40, Footrest, width 45, Rearwheel 
std 24” with titanium pushrim, High brake, Anti-tip, Sideguards, Cushion, width 45, 2.5 cm

Panthera U2:

Chassis U2 complete, width 45, Back complete, width 45, height 40, Footrest, width 45, Rearwheel 
std 24” with titanium pushrim, High brake, move forward, Anti-tip, Sideguards, Cushion, width 45, 2.5 
cm

Panthera S2 Swing:

Chassis S2 swing complete, width 42, Back complete, width 42, height 40, Footrest, Rearwheel std 
24” with titanium pushrim, High brake, Anti-tip, Sideguards with armrest, Cushion, width 42, 2.5 cm.

Departures from these results may occur if the chair is of a different model and dimensions. The 

height of the back of the chair affects the results significantly.

Содержание S2

























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды