panthera Freewheel Скачать руководство пользователя страница 9

Страница: 9 / 12

Panthera

AB reserves the right to make technical changes

How to Adjust for Steering

If your Freewheel is not tracking straight when coasting forward on level ground, the steering should be

adjusted. To do this you need to adjust two separate fasteners:

Front Set Screw, and

Main Steering Stem Bolt

1. The Front Set Screw holds the steering adjustment.

2. After loosening the Front Set Screw (3/32” allen or 2.5mm allen wrench) and Main Steering Stem Bolt,

rotate the fork to adjust the steering straight.

3. If the internal bushing is not rotating relative to the frame, then tighten the ball adjuster knob to lock

the fork to the internal bushing. Work the bushing loose from the frame. I like to re-grease this joint to

keep it from binding.

4. Set the steering and then tighten the Front Set Screw

5. Finish by tightening the Main Steering Stem Bolt.

6. Test for straightness by coasting on a flat surface.

Note

! The front ball adjuster knob can be backed off for light steering action or screwed in for heavier

steering action.

Front Set Screw

Ball Adjuster Knob

Main Steering Stem Bolt

Содержание Freewheel













Результаты поиска

Содержание Freewheel

Отзывы:

Похожие инструкции для Freewheel

Бренды по названию

Популярные бренды

panthera Freewheel, Руководство по сборке

Результаты поиска

Содержание Freewheel

Отзывы:

Похожие инструкции для Freewheel

Бренды по названию

Популярные бренды