Panthera AB, Gunnebogatan 26, SE-163 53 Spånga, Sweden, 08-761 50 40, www.panthera.se
Fig. 20
Pull off the foam from the pushbar.
Cut approx. 12cm on both sides of the foam.
Remount the two foam parts on the push-
handle.
Fig. 21
Fig. 22
Fig. 20
Mount the plastic sockets that comes with brake kit,
on both sides of the push handle.
Mount the brake handles and tighten the
screws.
Both brake handles mounted on the push-
bar.
Fig. 21
Fig. 22
Fig. 23
If the brake handle is short, 33 cm or below, you
might need to mount the handles as shown in the
image to make room.
Fig. 24
