January 2019
3/34
www.trackthestars.com
Introduction
TTS-160 Panther is an advanced computer controlled telescope mounting with
many installed features. It is not necessary to know all features in details to start
using the mounting. We have chosen to divide this user manual into two
sections: A “quick start” section to get you started observing with the mounting
and a more detailed section describing all functions thoroughly.
The quick start section should be read completely. The other section can be
used as a look up Manuel.
NOTICE:
The use of the optional Telescope rOTAtor is described in its own user manual.
Product safety
WARNING:
Never point a telescope towards the sun without proper full aperture solar filter.
Do never look in the eyepiece when the mounting is slewing during daytime as
the telescope might pass the sun.
Always setup the mounting on a level surface so that it cannot fall over.
The mounting consists of heavy parts
– be careful not to drop these.
Always keep a hand on the telescope when the dovetail adapter is not tightened
(for balancing etc.). All dovetails must have a security stop in each end securing
the dovetail can’t slide out of the dovetail saddle.
Electrical safety:
The mounting must be powered from a 12V battery with a 3 Amp fuse. Always
connect all cables to the mount and peripherals before connecting the battery.
Disconnect the battery power when the mounting is not in use.
WARNING:
Never use mains power and a 12V power supply for outdoor use.
Receiving the mounting
The mounting is unpacked from the shipping boxes and is immediately ready for
use.
