7
h
eight
A
djustment
A
ngle
A
djustment
A
djusting
the
steP ii h
eight
And
A
ngle
Hinge Screws
Slide Bar
Using the Allen wrench
included with your STEP,
loosen the two hinge screws.
Adjust the angle until
the sternal extensive
force is correct.
Hold the joint angle
and re-tighten the
screws.
Note: Loosen but don’t remove the screws.
The STEP II‘s height can be adjusted in two places:
The slide bar on top allows
you to adjust the height by
loosening the two screws with
the included Allen wrench
and sliding the bar.
The bottom bar placement can
be adjusted on the anterior plate
by removing the screws, adjusting
the bar position, and replacing the
screws in different holes.
Note: Make sure to tighten all screws prior to releasing the brace to the patient.
1
2
Height Range
16 1/8” - 22 3/8”
Shortest 16 1/8” High
Tallest 22 3/8” High
