4
Panther TLSL
Build Chart
Build
Range
Components
Brace Illustration
A
25” - 36”
(8) Power Unit
(1&2) Main Belts
(13) STEP
B
35” - 46”
(8) Power Unit
(1&2) Main Belts
(3&4) Short Belt Segments
(13) STEP
C
45” - 56”
(8) Power Unit
(1&2) Main Belts
(5&6) Long Belt Segments
(13) STEP
D
55” - 66”
(8) Power Unit
(1&2) Main Belts
(3&4) Short Belt Segments
(5&6) Long Belt Segments
(13) STEP
5. Install the Lateral Pouches (11) after sizing the brace.
6. Replace the Pull Handles (10) on the belt near the edges of the Power Unit (8), and extend the belt fully.
To find the correct build above, use the pants hip size for women and waist size for men.
Note: If the size range is between two Builds, choose the larger.
1. Open the Back
Pouch flap
2. Tack the Pull Handles (10) on
the edges of the Power Unit (8)
and open the Gator Clips (9).
3. Insert the Main Belts (1) (2) or Belt Segments (3) (4)
(5) (6) into the Gator Clips (9). Close the Gator Clips (9),
pressing firmly.
4. Adjust the Mickey height.
Note: See page 5 for instructions.
To create
Panther
Build, remove/attach belt segments
Note: The Panther is pre-assembled in Build B.
