17
Figure 6 – Power Cable RPM 113 7674/10
Route the lead away from high heat sources in the engine compartment
that may cause lead damage and introduce a fire hazard. In addition, the
lead should not be routed near electrical noise sources such as
electronic ignition modules or cruise control modules.
3.
Secure the cable at several locations within the engine compartment to
prevent possible damage to the cable.
4.
Connect the BLACK lead to the vehicle chassis. Connect the lead as
close to the radio as possible. DO NOT connect the BLACK lead to
the “NEG” or “-“ battery post. Connect the RED lead to the positive
(“POS” or “+”) battery post. See Figure 6.
N O TE
The power source must have a minimum current supply
capability of 13 amps.
