Pantech Sprint PX-500, Быстрый старт

Страница: 10 / 17

Activating Your Card 9
Inserting and Removing the Card
Inserting the Card
Once you have completed the software installation
procedure, you may insert your card into your PC Card slot.
The Sprint label should be facing up and the 68-pin connector,
located at the thinner end of the card, should be inserted
directly into the PC Card slot.
Note:
The Sprint Mobile Broadband Card should fit snugly, but you
should be able to insert or remove it easily from your PC Card slot.
A portion (the black section) of the card will remain outside
the PC Card slot. This section contains the card’s antenna and
the LED (light emitting diode) that indicates your connection
status. Because the card is not entirely contained in your
PC Card slot, it is important to remove the card when
transporting your notebook or Tablet PC to avoid damaging
the card.
When you insert the card, the following should occur:
If sound effects are enabled, the PC beeps.
The Unplug/Eject Hardware appears in the system tray,
unless the feature has been disabled.
The Sprint PCS Connection Manager starts, unless the
auto start feature has been disabled.
Ac
tiv
a
ting Y
our
C
a
rd