Pansat 2500A, Инструкции

Страница: 3 / 3

1010 North Frontier Drive • Fergus Falls, MN 56537-1023 Form 600-87M-0305
How do I set up Smart Search on my Pansat 2500A MPEG-2 Receiver?
• Press “ Menu ”
• “ Installation ” will appear on the screen, highlighted; press “ OK ”
• “ Antenna Setup ” will appear on the screen, highlighted; press “ OK ”
• Arrow down to each individual satellite and press “ OK ” on each satellite you wish to scan.
• Press “ Exit ”. When asked to save, press “ OK ”.
• Press “ Exit ” to return to the Installation screen.
Smart Scan
• Arrow down to “ Smart Search ” and press “ OK ”.
• Using the arrows, select the desired satellite to scan.
• Use the down arrow to select “
Polarity ”* and select “ All ”. Press “ OK ”.
• Use the down arrow to select “ Scan ”. Select “ FTA only ”; press “ OK ”.
• Allow Pansat to scan and save collected channels into your system. This will take up to 10 minutes.
Press “Exit” and repeat the “Smart Scan” steps to collect the opposite polarity channels. Example: If your analog
satellite receiver is on Channel 1, change it to Channel 2 to scan the opposite polarity.
*If you know the correct polarity of the channel you are on, you may select either “ Horizontal ” or “ Vertical ” in the
Polarity field. This will speed up the scanning process.