Panoz Esperante GTS, Инструкция по эксплуатации

Страница: 35 / 67

Panoz Esperante GTS
Panoz Esperante GTS Panoz Esperante GTS
RVP – Reliability / Value / Performance
Radiator Fill Procedure
1.
Confirm all hose clamps and water jacket fittings
are tight.
2. Remove the radiator cap and coolant reservoir
cap.
3. First fill through radiator neck, letting it drain
down.
4. Once the radiator is full, continue filling through
the coolant reservoir bottle (add Red Line Water
Wetter).
5. Start the motor and observe water temperature
closely. WATCH FOR AIR POCKETS IN THE
COOLING SYSTEM.
6. After the motor has run for a period of time and
there is no movement on the temperature gauge,
feel the left (driver’s side) of the radiator, if it is
cold, turn the motor off and carefully open the cap
on the radiator neck, more than likely there is an
air pocket.
7. When you remove the radiator cap, there may not
be water in the neck.
8. Slowly open the coolant reservoir cap, the water
should start to flow up the radiator.
9. Re-install the cap when the water reaches the
top.
10. Continue filling through the coolant reservoir bot-
tle. DO NOT OVER FILL - YOU MUST ALLOW
ROOM FOR EXPANSION.
11. Restart the engine and continue observing the
water temperature.
12. Turn the cooling fan on when the water tempera
ture reaches 200° F. Cycle fan operation between
180° F and 200° F.
Page 35