© 2007 PANORAMAdtv ALL rights reserved
14
MON2-3W
and
MON2-3/6.8
User Manual P/N
821525 Rev-E
(Continued)
H CVBS Out - BNC Female Connector (MSDI-4 SDI Option)
This connector supplies an analog CVBS encoded signal derived from the SDI input. Automatic standards
sensing is accomplished by detecting 525 or 625 line signals. 525 line SDI input signals are encoded as an
NTSC output. 625 line SDI input signals are encoded as a PAL output. (MSDI-4 SDI option is required.)
I CBAR On - 2-Position Toggle Switch (MSDI-4 SDI Option)
This switch controls a color bar generator associated with each monitor. To view the input signal, place
this switch in the DOWN position. To activate the color bar generator, place this switch to the CBAR ON
(UP) position. (MSDI-4 SDI option is required.)
J Tally Control - DB-25 Female Connector
This 25 pin sub-miniature female “D” connector allows you to tally individual monitor front panel Tally
indicators. Full connection instructions are described on page 18
K Model Identification Check Boxes
The model identification of the particular MON series unit is indicated by a check mark next to the
appropriate name in this silk-screened list. Note that "MON2-3" refers to the MON2-3/6.8 model.
Rear Panel Features
Section 2: Operation
