Instruction Manual VET LIFT
Page 20 of 27
Version 2.02
Special cleaning and care instructions (STAINLESS STEEL versions)
In case you have chosen a VET LIFT with a stainless steel frame, the following instructions
for cleaning the stainless steel frame are applicable in supplement to the general cleaning
and care instructions already provided above. These are basically similar to the cleaning
and care instructions for the stainless steel top.
For cleaning the stainless steel frame, a "mild" disinfectant (e.g. kitchen detergent) is
sufficient. The entire surface of the frame should be rinsed repeatedly with clean water and
wiped dry. Residues such as blood or urine should be removable with soap and water. In
the case of stubborn residues, it may be necessary to use a suitable brush in conjunction
with a special cleaner. Please make sure that this cleaner is suitable for stainless steel
surfaces (e.g. "SIDOLIN Ceran + Steel").
Never use steel wool or steel brushes, as otherwise micro particles could penetrate the
stainless steel surface and cause corrosion. If necessary, only use nylon or other plastic
brushes.
To remove calcium deposits or such limestones, preferably use vinegar and subsequently
rinse the surface with clean water. Afterwards, the surface of the frame should be wiped dry
with a soft cloth.
Avoid extended contact of halogen-containing substances (chlorine, bromine, iodine) and
thiocyanate with the stainless steel surface. Prolonged contact or drying of salty solutions
may also cause discoloration or corrosion.
The use of various PVC plastic mats as underlays is also not recommended. Heat exposure
in some operating lights can cause chlorides to escape, which in turn may come into contact
with the stainless steel and lead to discoloration or corrosion of the latter.
Regular cleaning with water and "mild" detergents as well as subsequent rubbing dry with
soft cloths has proven to be the ideal way to care for stainless steel surfaces. In this context,
one should bear in mind that there is no such thing as a completely corrosion-free stainless
steel plate, in whatever alloy form, so far.
The use of additional protective coating in the form of varnish or paint is also strongly
discouraged. Engravings of names or other carved information on the stainless steel surface
will immediately lead to surface corrosion.
Supplementary cleaning recommendations for powder-coated surfaces
To ensure a long lifespan for your product, the use of proper cleaning products for
powder-coated materials is strongly recommended. Follow the instructions provided by
the powder coating manufacturer as indicated below.
Содержание VET LIFT 7H9.6P1
