Receiver Installation
UTP Cable connected with KVM Transmitter to get the best display quality, please use
CAT.5e/6 Cable, and the cable connector node is to connect to Receiver
LINE port (RJ45)
Connect the IR Receiver cable to the Receiver Unit IR Port if
necessary. Connects Receiver with HDMI cable to HDMI Monitor.
Connects Receiver with USB cable
(Type A to Type A)
to the USB connector of the
Touch Screen.
Plug DC 5V/2A power adapter.
Monitor HDMI connected
IR Receiver
Power Adapter
Connect to USB of Touch Screen,
DC5V/2A
USB Keyboard or Mouse,
UTP Cable connected
Or wireless KB/MS sensor
Cascade Chain Connection
Use UTP Cable connected with Receiver to link the other two (2) Receiver Units
consecutively to extend another 100m distance, the cable connector node is to connect to
Receiver
LINE1 or
LINE2 or LINE3 port (RJ45), as long as the LINE port is not
occupied,
and user can
continue expanding corresponding to custom demand as likely
Cascade/Tree Chain web architecture spread.
Connect the IR Receiver cable or RS-232 to 3.5mm adapter to the Receiver Unit IR Port
or RS-232 port if necessary.
Connect Receiver with HDMI cable to HDMI connector of Display
Monitor. Plug DC 5V/2A power adapter.
Each Receiver with three (3) Line port, one is used for source input, and the other two are used for
expanding source to other receivers. User can choose any LINE port as source input at random,
and use the other two LINE port for expanding source to next tier receiver as long as the LINE port
is not occupied.
