USB DVI/VGA KVM Extender over CAT.x User’s Manual
- 8 -
3 Operations
3.1 Active Console Selection by Front Push Button
You can press front push button on local unit
Transmitter (TX)
to switch the active
console of operation, and there are two types of active console configurations:
1.
TX Active
You can operate the system only from local unit
Transmitter (TX).
2.
TX/RX Active
You can operate the system
Both
of local unit
Transmitter (TX)
and remote
unit
Receiver (RX)
at same time.
The default configuration is “Both Console” mode, including both of local and
remote consoles activating. The active console can be shown via of LED indicator,
please refer the description of next sections
3.2 LED Indicators
TX/RX Active Indicator (RED)
Indicates you can control your system from both of the local and remote console.
TX Active Indicator (RED)
Indicates you can control your system from local console only.
Power Indicator (RED)
Indicates the KVM unit is power on.
Link Indicator (GREEN)
Indicates link connection established.
