BA_PH_3V_EN_07-22.docx
34
10
Commissioning
Read the operating manual and the chapter
5 carefully before commissioning and observe them.
Before switching on, check that
•
the floor around the machine is clean and free of interfering parts and workpieces,
•
there are no loose parts on the machine table and all tools have been removed,
•
the bandsaw blade is well ground and correctly positioned on the guide rollers,
•
there are no objects in the bandsaw wheels,
•
the safety guards are fitted according to regulations,
•
the extraction system is connected and in good working order,
•
the saw blade tension is correctly adjusted,
•
the V-belts are tensioned
•
and no persons are in a danger zone of the machine.
10.1
Switching ON and OFF
10.1.1
Switch Machine ON
•
Check the sawblade tension and make sure that there are
no objects on the table. All doors must be closed and the
safety switches (see
11.2) locked.
•
Make sure that the brake release switch (
18
) is in the
“
OFF
”
position (turned to the left).
The machine can only be started when the brake
release switch (3) is switched off (left position).
•
Turn the main switch (
1
) on the rear to position
“
I
”
.
•
Switch on bandsaw blade with switch (
16
) and wait until
machine has reached its full speed.
Figure 15: Switch machine ON / OFF
10.1.2
Switch Machine OFF
•
Switch off the bandsaw blade with switch (
17
).
•
Turn the main switch (
1
) back to
position “
0
”.
•
Before leaving the machine, move the saw blade guard down to table level (see section
10.1.3
Brake Release
•
Turn the main switch (
1
) on the rear to position
“
I
”
.
•
Turn brake release switch (
18
) to the right.
•
The brake is released
→
Lamp (
19
) lights up.
10.1.4
Emergency Stop Equipment
In the event of an emergency, the machine can be put out of operation using the following push-buttons:
1.
Emergency stop button (
20
) on the control panel of the machine.
2.
Emergency stop button (
23
) on the control panel for the height adjustment of the upper saw blade guide.
20
19
17
16
18
Содержание 3V
Страница 2: ...BA_PH_3V_EN_07 22 docx 2 Space for notes...
Страница 4: ...BA_PH_3V_EN_07 22 docx 4 Space for notes...
