Panerai Luminor Base 8 Days, Инструкция по эксплуатации

Страница: 12 / 48

20
T
HE STRAP
Panerai straps must be washed in warm water and left to dry. It is important
not to dry them on a hot surface or to expose them to direct sunlight, because
the rapid evaporation of the water could damage their shape and quality. After
each bathe in the sea or a swimming pool, carefully rinse the strap with clean
water. It is recommended that the strap be replaced by an Authorized
Distributor or a Panerai Service Centre, in order to avoid any problems caused
by incorrect replacement.
Only an Authorized Distributor or Panerai Service Centre can guarantee the
use of genuine Panerai straps, properly designed to fit the dimensions of the
case and manufactured according to the quality standards of the brand.
All alligator leather used by Officine Panerai comes from farms in Louisiana,
USA. Officine Panerai’s suppliers have committed to the highest standard of
responsibility and have given their assurance that such farms in Louisiana
contribute to the stable growth of wild alligators, thus protecting this
endangered species. Panerai does not use skins coming from fragile or
endangered species taken from the wild.
A
TTENTION
:
Do not use the watch at a depth greater than that indicated.
The presentation case of your Panerai Luminor Base contains:
• Instruction booklet
• Guarantee booklet
• Guarantee certificate
• Numbered edition certificate
• Second interchangeable strap
• Steel screwdriver to change the buckle
21
PANERAI AFTER-SALES SERVICE
In order to maintain the superior quality of its watches throughout their life, Panerai
offers four different kinds of service:
- C
OMPLETE
S
ERVICE
- M
AINTENANCE
S
ERVICE
•
WITH POLISHING
(
DEPENDING ON THE MODEL
)
•
WITHOUT POLISHING
- C
HECKING AND ADJUSTING THE RUNNING OF THE WATCH
- E
XTERNAL OPERATIONS
C
OMPLETE
S
ERVICE
• Diagnosis of the movement
- Checking the appearance and state of cleanliness
- Checking the average rate
- Checking the functions
• Checking the dial and hands
• Checking the case, the bracelet or strap, the crystal and the anti-reflective coating
• Dismantling the movement by hand
• If necessary, changing any defective parts of the movement
• Cleaning the parts of the movement
• Reassembling and oiling the movement by hand
• Reassembling the dial and hands, checking their positioning and the parallelism
• Polishing and ultrasonic cleaning of the case and of the metal bracelet (depending
on the model)
• Replacing the seals