VeriSafe AVT
B21075
Rev: 00 04-2018
Absence of Voltage Tester
Instruction Manual
Models: VS-AVT2-C02L03, VS-AVT2-C08L10
For use in Hazardous Locations Class I, Division 2 or equivalent Class I, Zone 2
© Panduit Corp. 2018
Original Instructions
TO REDUCE THE RISK OF INJURY, USER
MUST READ INSTRUCTION MANUAL
NOTE: In the interest of higher quality and value, Panduit products are
continually being improved and updated. Consequently, pictures may vary from
the enclosed product.
NOTE: Updates to this Instruction Manual may be available. Check
www.panduit.com for the latest version of this manual.
Email:
EU Website:
EU Email:
emeatoolservicecenter
@panduit.com
www.panduit.com
Technical Support:
Tel: 1-866-405-6654
Panduit Europe • EMEA Service Center
Almelo, Netherlands
Tel: +31-546-580-452 • Fax: +31-546-580-441
The VeriSafe Absence of Voltage Tester is a permanently-mounted tester that is used to verify a circuit is de-
energized prior to opening an electrical enclosure. Once installed, a push of a button enables qualified electrical
workers to verify the absence of voltage and see an active indication when the absence of voltage is confirmed.
The Indicator Module is designed for a 30-mm notched panel knockout and the Isolation Module can be mounted
to DIN rail or surface mounted using screws.
