Panduit SmartZone EP042, Руководство пользователя

Страница: 56 / 70

SmartZone Gateway EP042 User Manual
- 56 -
Selecting this option commands the selected outlet to switch Off.
If the outlet is already off this will have no effect.
Reboot
The reboot option commands the selected outlet to switch off. After the time specified by
the Reboot Delay timer has elapsed, the outlet will automatically switch itself back On.
Switching an Entire PDU
You can switch all the outlets on any PDU Off or On with a single command by clicking
the
Lightning Bolt symbol on the end of a PDU graphic.
A small dialog displays, offering the following options:
On
This option commands all outlets on a selected PDU to switch on. Any outlets already
on will remain on; any currently off will be switched on.
Off
This option commands all outlets on a selected PDU to switch off. Any outlets already off
will remain off; any currently on will be switched off.
Abort!
Once a command has been issued to turn all of a PDU's outlets on or off, you can click
the
Abort! button to abort the command.
The Abort Cycle delay option on the PDU – Configure – Config menu specifies the time
allowed in seconds for an abort to be issued.
LDAP
Note : LDAP information does not apply to the Gateway EP042 when used with a Rack
Energy Kit.
SmartZone Gateway LDAP Overview
The SmartZone Gateway unit implements a Lightweight Directory Access Protocol
(LDAP) client. This allows the Gateway unit to authenticate user logins to the Web Man-
agement Interface using an LDAP Directory.
If LDAP is used for authentication, it is first consulted when a user attempts a login. If the
user is not found or access is denied by LDAP, then the credentials are checked against
the Gateway unit internal user list.