Panduit PAT1.5M, Руководство по эксплуатации

Страница: 3 / 38

PAT1M / PAT1.5M OPERATION MANUAL
PAT1M/PAT1.5M: PA22222A01_03 Page: 1 of 36 Dec., 2007
INTRODUCTION
The PAT1M/PAT1.5M Fully Automatic Cable Tie Installation System was designed by Panduit Corporation to install
PANDUIT
continuously molded cable ties for high volume wire harnessing applications.
NOTE: In the interest of higher quality and value, PANDUIT products are continually being
improved and updated. Consequently, pictures may vary from the enclosed product.
SYSTEM SPECIFICATIONS
The Panduit Corporation PAT1M/PAT1.5M Cable Tie Installation System consists of four compatible units: the
PAT1M or PAT1.5M Installation Tool, the PDM Dispenser, the PHM Feeder Hose, and
PANDUIT P
AN
-T
Y
Cable Ties.
Order the following reels of continuously molded cable ties (5000 cable ties per reel) for your specific installation tool:
PLT1M-XMR cable ties for the PAT1M Tool, and PLT1.5M-XMR cable ties for the PAT1.5M Tool.
NOTE:
Any substitution may cause serious damage to the system and/or injury to the operator.
PAT1M / PAT1.5M TOOLS
The PAT1M and PAT1.5M Cable Tie Installation Tools are electrically powered and controlled by the PDM
Dispenser. Designed for easy operation: hand held, lightweight, and right or left hand use. The tool jaws are
normally open for easy positioning around wire harnesses and the jaws are closed by pulling up on the trigger before
application of the cable tie. After the cable tie has been applied, the jaws are re-opened upon release of the trigger
for positioning of the tool at the next cable tie location.
Tool Type P
AN
-T
Y
Cable Ties Cable Tie Size Max. Bundle Dia. Reel Quantity
PAT1M PLT1M-XMR
3/32" (2,4 mm) wide x
4.1" (104 mm) long
0.82" (21 mm) 5000 Cable Ties
PAT1.5M PLT1.5M-XMR
3/32" (2,4 mm) wide x
5.5" (140 mm) long
1.31" (33 mm) 5000 Cable Ties
LENGTH:
10.12” (257 mm)
WIDTH:
1.89" (48 mm)
HEIGHT:
4.09" (104 mm)
WEIGHT:
1.75 lbs. (0,79 kg)
HANDLE SIZE:
1.34" (34 mm) thick x
1.99" (50,5 mm) wide
JAW WIDTH:
0.247" (6,3 mm) thick
TRIGGER FORCE:
0.9 lbs. (0,41 kg)
TRIGGER STROKE:
0.37" (9,4 mm)
Downloaded from Elcodis.com electronic components distributor