INSTRUCTIONS CM385E
For Technical Support: www.panduit.com/resources/install_maintain.asp
Page 11 of 12
Ganging with Net-Access Cabinets
Position Net-Access cabinet next to CN7018 cabinet. Install (2) top ganging brackets by passing through the slots in the top cap side extension
and secure each with (1) #10-32 hex nut and (1) #10 lockwasher to the #10-32 press stud in the top cap side extension. Fasten top ganging
brackets to Net-Access cabinet ganging tab using (1) #12-24 serrated hex head screw per each bracket. Install (2) bottom ganging brackets to
CN7018 cabinet with (1) #12-24 serrated hex head screw per bracket as shown. Fasten bottom ganging bracket to the back side of Net-Access
cabinet door shoe using (1) #12-24 serrated hex head screw per bracket.
NOTE:
Net-Access cabinet can be positioned so that it is flush with either the front or the rear of the CN7018.
CN7018 GANGED WITH
NET-ACCESS CABINET
Net-Access
cabinet
ganging tab
Pass top ganging bracket
through slot in top cap
side extension
#10-32 hex nut and
#10 lockwasher
(use 3/8” wrench)
Net-Access cabinet
CN7018 cabinet
FRONT OF
CN7018
CABINET
To gang Net-Access cabinet flush with FRONT
of CN7018, install top ganging brackets here
To gang Net-Access cabinet flush with REAR
of CN7018, install top ganging brackets here
Top Mounting Locations
Bottom Mounting Locations
#12-24 serrated
hex head screw
(use 5/16” socket wrench)
Bottom ganging
Bottom ganging
Back side of existing
cabinet door shoe
bracket
FRONT OF
CN7018
CABINET
To gang Net-Access cabinet flush with FRONT
of CN7018, install bottom ganging brackets here
To gang Net-Access cabinet flush with REAR
of CN7018, install bottom ganging brackets here
bracket
#12-24 serrated
hex head screw
(use 5/16” socket wrench)
#12-24 serrated
hex head screw
(use 5/16” socket wrench)