MEHT
OPERATION INSTRUCTIONS
Page: 14 of 14
Hints for Trouble Free Operation
Keep the following in mind when using the
labelmaker:
•
Letters appear where you want spaces -
You are probably squeezing the
embossing handle too hard.
•
Letters overlap - The tape is slipping. This
can happen when dirt or grease gets on
the rollers. Clean the rollers by using a
soft cloth and alcohol, while turning the
tape advance knob back and forth several
times.
•
Avoid turning the embossing wheel at the
same time you are squeezing the
embossing handle. This can damage the
character blades.
•
When punching a cable tie slot, make
sure the label is well inserted and abutted
against the end of the slot. If the label is
not inserted to the end, tape jam may
occur.
