Centering the Text on the Label
The leader/trailer length guide (M) has
positioning marks for a short (S) or long label
(L). Use the marks on the guide to center the
text on your label.
To center the text on a long label
1.
After cutting the previous label, emboss
the text on a new label.
2.
Pull the leader/trailer length guide (M) to
the forward position.
3.
Advance the tape until the last embossed
letter is opposite the L on the guide. The
label has a leader/trailer of approximately
2" (5 cm) and the text is centered.
4.
Lift the cutting handle (I) to the vertical
position to cut the tape.
MEHT
OPERATION INSTRUCTIONS
Page: 9 of 14
M
