CT-930
CT-930: PA25202A01_01
Page: 7 of 7
5-2012
4.
As long as the daily maintenance procedures are adequately carried out, the tool will provide
quality service for years. However, if problems are experienced, please contact our Tool
Solutions Division Service Department at (888) 506-5400, ext. 83255.
CLEANING AND LUBRICATION
OF TOOL HEAD
Thorough cleaning and lubrication of the tool head is recommended annually, depending on usage. It is
recommended that the CT-930 Tool be returned to Panduit Tool Solutions Division for proper
maintenance by our trained service staff.
VISUAL INSPECTION
1.
Visually inspect tool for cracks or damage that may affect tool performance.
2.
Visually inspect dies for cracks, chips or damaged surfaces.
3.
Visually inspect tool for loose or missing components and evidence of loss of hydraulic fluid.
4.
If tool is damaged, or if parts are missing, contact Panduit Tool Solutions Division.
TOOL FORCE INSPECTION / CALIBRATION
Inspect the compression force of the crimp head monthly, whenever possible damage has occurred, or
as often as operating conditions warrant.
The tool output force can be certified by using a Panduit Compression Gauge, CG-920 (purchased
separately;
see Optional Accessories on Page 1
,
or return tool to Panduit Tool Solutions Division for
maintenance and calibration.
For further information or assistance, call Panduit Tool Solutions Division at 888-506-5400, ext. 83255;
and ask for one of our Tool Service Technicians.
