Panduit CT-600-A, Руководство по эксплуатации

Страница: 7 / 15

© Panduit Corp. 2013
OPERATING INSTRUCTIONS CT-600-A
Page: 5 of 12
POSITIONING DEVICE (PD-600-A)
(Sold Separately)
INSTALLATION OF POSITIONING DEVICE (PD-600-A)
1. Clamp Positioning Device on edge of table.
2. Remove both screws holding the Tool Clamp Blocks
3. Install CT-600-A between Tool Clamp Blocks, away from CT-600-A’s Actuation Lever.
4. Tighten both Tool Clamp Block Screws.
5. Use Swivel Clamp Arm to loosen Positioning Device and position CT-600-A for operation.
BASE PLATE
HEXAGONAL
SOCKET HEAD
SCREW (1)
M10 x 16mm
POSITIONING CLAMP
SWIVEL CLAMP ARM
CLAMPING SCREW
TOOL CLAMP
BLOCKS
HEXAGONAL SOCKET HEAD
SCREW (2) M12 x 80mm