© Panduit Corp. 2013
OPERATING INSTRUCTIONS
CT-600-A
Page: 1 of 12
PRECAUTIONS AND GENERAL GUIDELINES
Always observe the following safety precautions when using this tool:
WARNING
Read and understand all of the instructions and safety information in this manual
before operating or servicing this tool.
Failure to observe this warning can result in severe injury or death.
WARNING
Electric Shock Hazard:
•
Verify electrical power is “OFF” before working on wiring with this tool. It is
not designed to insulate against shock and should never be used on live
electric circuits.
•
Do not use with frayed, abraded or cut air hose.
Failure to observe this warning can result in severe injury or death.
WARNING
•
Do not remove the Safety Guard from the tip of the crimping head. It is
designed to guard against accidental closure on hands and is intended for
the operator’s safety.
•
Always lock the actuating lever in the neutral position when the tool is not in
use. To lock the tool, move the Safety Lock to the “DOWN” position.
Failure to observe this warning can result in severe injury or death.
WARNING
Wear eye protection when operating or servicing this tool.
Failure to wear eye protection can result in serious eye injury from flying
debris.
WARNING
•
Do not exceed air pressure of 115 psig.
